SF6 Gas Servicing Cart (E736A)
The ENERVAC SF6 Gas Servicing Cart is designed for the processing of Sulfur Hexafluoride used in high voltage metal-clad switch gear, bus ducts, accelerators, circuit breakers and transformers that are charged during normal operation with SF6 gas as a dielectric. The Cart will perform the following functions:
-
Removal of SF6 gas from equipment, liquefaction and storage of the gas in the on-board storage tank.
-
The Servicing Cart evacuates the serviced equipment for dry out prior to re-charging.
-
Re-evaporating SF6 gas and refilling evacuated equipment.
-
Purification of SF6 gas by absorption and removal of decomposition products and moisture.
All functions can either be fully automatic, controlled by a programmable controller or manual.
Features:
-
Rugged steel enclosure
-
Regulated inlet for direct connection to high-pressure bottles without throttling.
-
High discharge pressure for liquefaction in high ambient temperatures.
-
Color change moisture indicator to monitor moisture in the gas.
-
Can be used with SF6 tanks, bottles or carts.
-
Automatic shut off when maximum allowable pressure is reached.
-
High pressure, direct-drive oil-less compressor with 1000:1 compression ratio (capable of 1000psi – 69 bar)
-
Purifies, dries and filters to 0.1 microns during recovery and re-pressurization
-
Filters are easily changed without disconnecting any tubing or using any special tools
-
Comes complete with 9.8ft / 3m hoses and power cable
